We only show the amplitude LFO as all of these have identical controls.
Freq. The frequency of the oscillator
Depth The amplitude variation applied
Start (phase) The LFO position when the note starts. This is locked to the incoming MIDI clock if both BPM mode and Continuous is set
Delay Time delay before the LFO comes in to effect
Rand Amp. (random amplitude) Degree of 'humanising' variation of LFO amplitude
Rand Freq. (random frequency) Degree of 'humanising' variation of LFO frequency. Disabled if BPM mode set.
Str. (stretch) Anticlockwise LFO is faster on lower pitch notes and vice-versa. If BPM is set the control does nothing
BPM When checked locks the delay control to the incoming MIDI clock
Cont (continuous) Normally the LFO starts and stops with the notes, but when checked the LFO is free running independent of whether any notes are sounding, unless BPM mode is set
Type The shape of the LFO waveform
Where LFOs are used in the frequency panels, it's advisable to be cautious with the depth control, especially when using the more extreme LFO shapes e.g. square wave (Squr).
These can become unstable at high depth settings.
